Automotive Carbon Canister Market | 2022-2030 | Industry Trends, Industry Size, Opportunity & Forecast till 2030

Automotive Carbon Canister Market | 2022-2030 | Industry Trends, Industry Size, Opportunity & Forecast till 2030

Global Automotive Carbon Canister Market size is anticipated to register a significant CAGR of 4% between 2020 and 2026. The carbon canister is an automotive component of the evaporative emission control system (EVAP) that is attached to the fuel tank. This device is used to capture and store the fuel vapor emission from the fuel tank when the vehicle is at a halt. When the engine starts running, the stored fuel hydrocarbons are used for combustion after the filtration process in the canister. The carbon in the canister absorbs the contaminated particles from the fuel and purifies the fuel for use.

 

Carbon Canisters are devices found in automobiles designed to decrease the amount of air pollution the vehicle creates while at the same time increasing its fuel efficiency. Even when the vehicle's engine is turned off, hydrocarbons are produced. This occurs in the form of fuel vapor rising in the fuel tank. Carbon Canisters trap that vapors rather than allow it to escape the fuel tank, feeding it back into the engine. Carbon Canisters are rectangular-shaped boxes that sit apart from the fuel tank next to the throttle in most vehicles. There is an input port and an output port, with the two ports side by side. There are three chambers inside the canister, running in sequence from the intake to the outtake. The interior of the canister is filled with charcoal or carbon pellets. The input of the canister connects to the gas tank's vent port, while the output connects to the purge valve in the side of the vehicle's intake manifold.

 

When the vehicle is shut off, there is a pressure imbalance within the fuel tank caused by fuel being siphoned out, but no air being let back in to take up the empty space. The lower pressure in the gas tank promotes a greater rate of evaporation, letting some of the fuel become a gas. Eventually the tank's internal pressure equalizes, at which point the gas leaves the tank through the vent port and goes into the carbon canister. It is trapped there by the properties of the carbon within the canister, keeping it from escaping into the air. When the vehicle's engine starts, the sudden suction created along the intake manifold opens the purge valve and pulls all the gaseous fuel out of the canister and burns it in the engine. The canister goes unused until the car is turned off again.

 

 

In 2019, Asia-Pacific Contributed Significantly to the Automotive Carbon Canister Market in Terms of Share: MRFR

 

Based on region, the global Automotive Carbon Canister market has been segmented into North America, Europe, Asia-Pacific, and the rest of the world. Asia Pacific is anticipated to hold the highest automotive carbon canister market share throughout the forthcoming years. This growth is attributable to the presence of several OEMs in China and India. Besides, increasing population and industrialization in the region is expected to boost the production and sales of passenger cars. In Europe, the market would grow significantly because of the implementation of strict rules for lowering emissions in the atmosphere.

 

Global Automotive Carbon Canister market has been segmented by type, sales channel, vehicle type, and region. Based on Type, the global Automotive Carbon Canister market can be bifurcated into small capacity carbon canister and large capacity carbon canister. The small capacity carbon canister segment is anticipated to grow at a significant CAGR in the coming years. By Sales Channel, the Automotive Carbon Canister market has been split into OEM and Aftermarket. The OEM segment held a sizeable share and is anticipated to grow at a significant CAGR in the coming years. By vehicle type, the Automotive Carbon Canister market has been split into passenger cars and commercial vehicles. The passenger cars segment held a sizeable share and is anticipated to grow at a significant CAGR in the coming years.

 

Global Automotive Carbon Canister Market size is anticipated to register a significant CAGR of 4% between 2020 and 2026.

 

 

Scope of the Report

 

This report provides an in-depth analysis of the global Automotive Carbon Canister market, tracking three market segments across four geographic regions. The report studies key players, providing a six-year annual trend analysis that highlights the market size and shares for North America, Europe, Asia-Pacific, and the rest of the world. The report also presents a forecast, focusing on the market opportunities for the next six years for each region. The scope of the study segments the global Automotive Carbon Canister market by type, sales channel, vehicle type, and region.

 

Browse Full Report Details @ https://www.marketresearchfuture.com/reports/automotive-carbon-canister-market-10433

 

·        Type

·         

·         

·        Small Capacity Carbon Canister

·        Large Capacity Carbon Canister

 

 

·        Sales Channel

·         

·         

·        OEM

·        Aftermarket

 

 

·        Vehicle Type

·         

·         

·        Passenger Cars

·        Commercial Vehicles

 

 

·        By Region

·         

·         

·        North America 

·        Asia-Pacific 

·        Europe

·        Rest of the World

 

 

Key Players

 

Key Players in the Global Automotive Carbon Canister Market are Roki, Kayser Automotive Systems, Futaba, Langfang Huaan Automobile Equipment, Delphi Automotive PLC, Asian Industry, Stant, Hengbo Holdings, Korea Fuel-Tech, and Tianjin Gelin Lifu New Technology.